1. 2. 3. material content data sheet sales product name bsc105n10lsf g issued 19. february 2015 ma# MA001337720 package pg-tdson-8-1 weight* 122.80 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 5.418 4.41 4.41 44118 44118 leadframe non noble metal iron 7439-89-6 0.038 0.03 308 inorganic material phosphorus 7723-14-0 0.011 0.01 92 non noble metal copper 7440-50-8 37.762 30.76 30.80 307510 307910 wire non noble metal copper 7440-50-8 0.028 0.02 0.02 229 229 encapsulation organic material carbon black 1333-86-4 0.078 0.06 634 plastics epoxy resin - 5.528 4.50 45016 inorganic material silicondioxide 60676-86-0 33.323 27.14 31.70 271367 317017 leadfinish non noble metal tin 7440-31-5 1.452 1.18 1.18 11821 11821 plating noble metal silver 7440-22-4 0.166 0.13 0.13 1348 1348 solder noble metal silver 7440-22-4 0.101 0.08 825 non noble metal tin 7440-31-5 0.081 0.07 660 non noble metal lead 7439-92-1 3.868 3.15 3.30 31499 32984 clip plating noble metal silver 7440-22-4 1.289 1.05 1.05 10501 10501 heatspreader non noble metal iron 7439-89-6 0.011 0.01 92 inorganic material phosphorus 7723-14-0 0.003 0.00 28 non noble metal copper 7440-50-8 11.320 9.22 9.23 92184 92304 heat sink clip non noble metal iron 7439-89-6 0.022 0.02 182 inorganic material phosphorus 7723-14-0 0.007 0.01 55 non noble metal copper 7440-50-8 22.292 18.15 18.18 181531 181768 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
